Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Choosing the right turns ratio for your pulse Transformer isn't just spec-sheet trivia – it's a make-or-break design decision most engineers wrestle with. Get it wrong, and your gate drive falters or your power stage chokes. Let's cut through the noise:
Think "signal integrity bodyguard." Models like the popular GT2011 (1:1:1 ratio) shine when you need clean isolation without voltage games. Here’s why they dominate control circuits:
Zero Pulse Distortion: Handles ET=200Vμs without breaking a sweat → perfect for fussy thyristor triggers.
Tames Ringing: Leakage inductance ≤25μH keeps high-frequency gate drives (think IGBTs/MOSFETs) stable and quiet.
Fits Anywhere: At just 20mm long, it squeezes into tight PLC panels or cramped driver boards.
Live in the Wild: Industrial PLCs, motor gate drives, anywhere signal purity > voltage gain.
Voltage Rocket Fuel: Shoots 65V inputs to 389V outputs → essential for DC/AC inversion grunt work.
Handles Real Power: 375W at 50kHz? Easy. Solar microinverters and EV chargers run on this.
Isolation You Trust: 3000VAC hipot tested → sleeps soundly in 800V battery systems.
Live in the Wild: Solar inverters, EV charging modules, any app where "more voltage" solves problems.
Inductance vs. Frequency:
Low ratios (1:1): Prioritize Lk ≤25μH (GT2011) to suppress noise at 10kHz+.
High ratios (1:6): Target primary inductance >3.2μH (FP3415-351) to prevent saturation at 50kHz.
Thermal Limits:
1:1 transformers dissipate 0.7W (85°C max), suited for controlled environments.
1:6 designs require heatsinking for 375W loads; validate ΔT at 65°C operating temps.
Regulatory Compliance:
RoHS-certified models (e.g., GT2011) simplify global sourcing for industrial OEMs.
A 20kW inverter project using 1:6 Pulse Transformers achieved:
98% efficiency by matching 3.2μH inductance to 50kHz switching frequency.
30% cost reduction versus European equivalents, leveraging RoHS-compliant manufacturing.
1:1 for control, 1:6 for power – your application defines the ratio. Need help navigating DCR, ET values, or thermal specs? Our engineers specialize in optimizing Pulse Transformers for your unique requirements.
Contact us for custom solutions: sales@ferrtx.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.